Download The Windows Support Software

2/11/2022by admin

Installing Windows on a Mac should be a piece of cake with Bootcamp, but thatrarely is the case. In fact, I would personally say that Boot Camp Assistantis one of the worst apps that comes with OS X and unlike the rest, it doesn’twork seamlessly.

If you are installing Windows 10 on a PC running Windows XP or Windows Vista, or if you need to create installation media to install Windows 10 on a different PC, see Using the tool to create installation media (USB flash drive, DVD, or ISO file) to install Windows 10 on a different PC section below.

Download Vivado ML Edition 2021.1.1 now, with support for. Artix UltraScale+ Devices:- XCAU25P. For customers using these devices, Xilinx recommends installing Vivado 2021.1.1. For other devices, please continue to use Vivado 2021.1. Microsoft® ODBC Driver 13.1 for SQL Server® - Windows, Linux, & macOS. The Microsoft ODBC Driver for SQL Server provides native connectivity from Windows, Linux, & macOS to Microsoft SQL Server and Microsoft Azure SQL Database. If your system is not running Windows 7 or 10, or for drivers/software for other AMD products such as AMD embedded graphics, chipsets, etc. Please select your product from the menus below. If you disabled your antivirus software before the installation, make sure you turn it back on. Downloading and installing Windows SP1 from the Microsoft Download Center. If you’re unable to install SP1 from Windows Update, you can download the installation package from the Microsoft Download Center and then install SP1 manually.

A few of its drawbacks:

  • It only supports a drive with a single partition.
  • It often throws very obscure error messages with limited detail.
  • It re-downloads 1.6 GB Windows drivers every single time it runs. These areplaced under /Library/Application Support/BootCamp/WindowsSupport.dmg anddeleted and re-downloaded each time Boot Camp Assistant starts processing.

This post did take a lot of work to complie and I did bone my hard drive afew times while trying certain ideas, so please throw out a thanks if ithelped you out :)

Disclaimer: This guide below contains procedures which can potentiallydestroy your partitions and data. I accept no responsibility for such loss soplease proceed at your own risk.

Update (2016-07-20): I have updated this post with further improvementsrelating to downloading of Boot Camp drivers and ensuring that a Hybrid MBR isnot used (which would cause issues when installing Windows).

What You Will Need

  • An 8 GB or larger USB stick
  • A copy of the Windows 10 ISO
  • A valid Windows 10 license
  • A downloaded copy of unetbootin

Downloading Boot Camp Drivers

  1. Start Boot Camp Assistant
  2. Select Action / Download Windows Support Software
  3. Choose your Downloads directory, enter your password and then clickSave

This will be the only step that we will use Boot Camp Assistant for.

Creating a Bootable USB Windows 10 Installer

Formatting Your USB Stick

Attach your USB stick and start Disk Utility, select your USB drive in theleft panel under External, click Erase and set the options as follows(exactly) and click Erase:

Name: FAT32
Format: MS-DOS (FAT)
Scheme: Master Boot Record

Turning Your USB Stick into a Windows Installer

Open unetbootin, enter your password, set the options as follows andclick OK:

Diskimage: checked, set to ISO and browse to your Windows 10 ISO
Type: USB Drive
Drive: Your USB drive (you should only see one entry here)

If you see more than one drive listed, you may confirm which is your USB driveby opening the Terminal and typing:

You’ll see your USB drive in the output and it should look something like this:

Once you have kicked off unetbootin, grab a snack while the Windows ISO iscopied to the USB stick. This process takes around 15 minutes to complete.

Finishing Up

When this has completed, you may right click on the USB stick in Finder,select Rename “FAT32” and rename it as you like (I’ll call mine“WINDOWS 10”).

Finally, copy the WindowsSupport in your Downloads directory tothe Windows 10 USB stick so it’s easy to get to after our installation.

Partitioning Your Drive

In Disk Utility, select your internal hard drive on the left panel, andclick on Partition.

Click the + button and create a new partition of your desired size for yourWindows installation and name it as you wish (I’ll call mine “BOOTCAMP”). Ensure that the Format is set to MS-DOS (FAT) and click on Apply.

Ensuring that a Hybrid MBR is not used

Huge thanks to Rod’s post from the superuser post titledWindows detects GPT disk as MBR in EFI boot.

Once you add a FAT32 partition with either Boot Camp Assistant or Disk Utility,your disk is converted into a hybrid GPT / MBR disk which is actually notsupported by newer versions of Windows. In this step, we revert thisadditional change made by Disk Utility by switching back to a pure GPTpartition table.

  1. Dowload the latest version ofGPT fdiskby browsing to the version, then gdisk-binaries and clicking the filewith the *.pkg extension (e.g. gdisk-1.0.1.pkg).

  2. Install GPT fdisk by running the installer you downloaded

  3. Open a Terminal and check the state of your MBR

    If your MBR partition is set to hybrid, please continue with step 4,otherwise if it is set to protective, you may skip the rest of thissection. Simply type q and hit return to exit GPT fdisk.

  4. Type p to view the existing partition table and verify you’re workingon the correct disk

  5. Type x to enter the expert menu

  6. Type n to create a fresh protective MBR

  7. Type w to save your changes and confirm the change when asked

  8. Type q to exit GPT fdisk

  9. Run GPT fdisk to show your disk layout:

    Your partition table should look something like this:

Boot

Installing Windows

Disconnecting All Devices From USB Ports

This step is critical as I have had rather serious problems during Windowsinstallation when certain external drives are connected.

Unplug everything from your Mac except your keyboard (if wired) and yourbootable Windows USB stick (which we prepared earlier).

If your Mac contains multiple physical drives, you will need to disconnectall disks except the one which you intend to install Windows on or you mayencounter the following error:

Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation.

Booting From the USB Stick

Ensure that the USB stick containing the Windows installer is inserted andthen restart your Mac while holding down the option (alt) key.

You should now be presented with a list of bootable drives. Select the USBdrive (usually titled “EFI Boot”) to begin installing Windows.

Correcting Your Windows Hard Disk Partition

When you are asked Where do you want to install Windows?, select theWindows partition created earlier (which I called “BOOTCAMP”) and clickDelete.

Next, select the chunk of Unallocated Space and click on New to createa proper Windows NTFS partition.

Note: OS X only supports creation of FAT filesystems, so this is why we needto re-create the partition ourselves during install.

Completing the Installation

Allow the installer to complete and boot into Windows.

Installing Boot Camp Support Software

Once Windows is up and running, install the Boot Camp Support software runningWindowsSupport/BootCamp/Setup.exe on your USB stick.

Note: The installer takes a little while to show up, so please be patient.

You may encounter a known issue whereby the Boot Camp Support Softwareinstaller locks up while installing Realtek audio.

If this occurs, you will need to open Task Manager and kill theRealtekSetup.exe process.

After the installer has completed, answer No when prompted to rebootand install the Realtek drivers manually by running%USERPROFILE%AppDataLocalTempRarSFX0BootCampDriversRealTekRealtekSetup.exe.If you can’t find this file, check any other directories starting withRARSFX under %USERPROFILE%AppDataLocalTemp.

Once complete, reboot Windows.

What You Will Need to Configure Windows

  • The latest version of SharpKeys
  • The flipflop-windows-sheel binary (see README for a download link)

Configuring Windows

Mapping Your Mac Keyboard

Download windows support software stuck

Install and run SharpKeys and then configure the following mappings tocorrect your Mac keyboard so that it behaves like a regular Windows keyboard:

Function: F13 -> Special: PrtSc
Special: Left Alt => Special: Left Windows
Special: Left Windows => Special: Left Alt
Special: Right Alt => Special: Right Windows
Special: Right Windows => Special: Right Alt

Note: for F13, you’ll need to select Press a key and click F13 on yourkeyboard.

Switching to Natural Scrolling

If you wish to flip scrolling direction to match that on OS X, runFlipWheel.exe and then click on Flip All.

Enabling Num Lock on Boot

Paste the following into a file named Enable NumLock on Boot.reg thenimport this into the registry to enable NumLock when Windows boots up(it doesn’t by default).

Completing Configuration

That’s it, give your machine one last reboot and you’ll have a fully workingWindows 10 installation.

Note: I have found Apple’s Magic Mouse to be extremely unreliable usingthe Boot Camp drivers from Apple. As such, I recommend purchasing a Logitech(or similar) mouse for use in Windows. I have no trouble plugging thewireless receiver for my Logitech mouse into one of the USB ports of my wiredApple Keyboard and it’s so tiny that you can’t see it at all.

Cleaning up a Windows Installation

Removing the Windows Partitions

If you decide to remove Windows, you may find that Disk Utility doesn’t allowyou to delete the two partitions that have been created by the Windowsinstaller.

This happens due to the fact that the first small partition created is of atype called Microsoft Reserved which OS X’s Disk Utility doesn’t support.

The safest way to delete these partitions is through the Windows installer. Sosimply boot from your USB stick as we did before and when you reach theWhere do you want to install Windows? question, you may delete your“BOOTCAMP” partition and the small 16 MB partition of type MSR (Reserved)just above the BOOTCAMP partition.

Once done, simply quit the installer by clicking the X in the top right cornerof each Window and reboot back into OS X.

Removing the Boot Entry

Even though we have removed the Windows partition, a boot entry will still bepresent when holding down option (alt) during boot.

Download The Windows Support Software

You may remove these items by running the following in your Terminal:


Software Download



vDisplay Manager


vDisplay Manager is a desktop software exclusive to select ViewSonic VP series models for quick and easy color control settings. In addition to integrating the On-Screen Display (OSD) menu controls and advanced settings, the software comes with user friendly color setting features including: Standard Color, ViewMode, Color Temperature, Auto Pivot, PBP and PIP mode, and monitor firmware update. These handy features allow users to quickly adopt color settings based on their preference while also enhancing work productivity.

  • Standard Color provides preset color modes* for the user to select based on their preference.
    *Preset color modes might be different based on the monitor's color display capability.
  • Provides presets (Standard, Movie, Game FPS 1/FPS 2, RTS, MOBA, Web, Text, Mac, Designer CAD/CAM, Animation, Video Edit, Retro, Photo, Landscape, Portrait, Monochrome) for the user to select from for the most suitable setting.

  • Color temperature offers specialized presets to fit the different usage scenarios including panel default, bluish, cool, native, warm, and a customizable user slot. The user can set their preferred color temperature according to their preference.
  • Color calibration, with three customizable slots, enables the user to quickly adopt existing calibration settings.
  • PBP (Picture-by-Picture) and PIP (Picture-in-Picture) enable the user to select from different input sources and increase the number of screens on-screen.
    • PBP mode allows the user to display separate screens from two different sources.
    • PIP mode can display the main input source on the main screen while the second source is displayed in a sub-window. It also allows the user to adjust sub-window size and position based on the user’s preference.
  • Basic Settings features: Color Adjust, Image Adjust, Audio Adjust, and Input Select.
    • Color Adjust: The user can quickly adjust the brightness and contrast.
    • Image Adjust: The user can quickly adjust the image sharpness and blue light filter.
    • Audio Adjust: Simply drag the bar to increase, decrease, or temporarily mute the volume.
    • Input Select: In addition to Auto Detect, the user can switch between the input options shown on the menu.
  • The Advanced Settings include the Information of current display with firmware update. Auto Pivot which lets the user pivot the screen in accordance with the monitor’s layout, and All Recall to revert all settings to default.
  • VP3481 and VP3881 do not support the Auto Pivot feature.
  • Support OS: macOS Mojave (10.14.6); macOS Catalina (10.15.4) (Remark: The notarization requirement for Catalina is not complete implemented yet.)
  • Support VP models: VP3481, VP3881, VP2458, VP2768, VP2768-4K, VP2785-4K, VP2785-2K, VP3268-4K, VP2771, VP2468, VP3481a, VP2468a, VP2768a
  • This release improves Firmware Update Tool.

Download Windows Support Software Without Usb

  • VP3481 and VP3881 do not support the Auto Pivot feature.
  • Support OS for VP series : Windows 10 latest version and compatible with Windows 7
  • Support VP models: VP3481, VP3881, VP2458, VP2768, VP2768-4K, VP2785-4K, VP2785-2K, VP3268-4K, VP2771, VP2468,VP3481a,VP2768a,V2468a,VP2768a-4K, VP3268a-4K
  • Note : Fix the improper version number issue for VP2771 since firmware version M010.

Colorbration


ViewSonic’s Colorbration kit includes the CS-XRi1 color sensor, which has been co-developed with X-Rite to provide the best solution for displaying long-term color accuracy. CS-XRi1 is X-Rite’s next generation colorimeter, which utilizes a redesigned optical system, filter technology, calibration architecture, and intelligent form factor to be paired with Viewsonic’s Colorbration application to deliver unrivaled color accuracy, repeatability, and device longevity.

The
  • Version : v1.7.0
  • Release Date : 04/13/2021
  • Support : VP2468, VP2768, VP2768-4K, VP2785-2K, VP2771, VP2785-4K, VP3268-4K, VP3481, VP3881
  • Operating system :
      ‧ Macintosh OS : macOS Mojave 10.14, macOS 10.15.x (Catalina), macOS 11.0.x (Big Sur)
  • Display calibration sensor : Best with ViewSonic CS-XRi1, compatible with X-Rite i1Display Pro and i1 Pro 2, X-Rite i1Pro 3 and i1Pro 3 PLUS spectrophotometers, X-Rite i1Display Pro PLUS device.
  • Note : Added one “Reset Device” button to provide the ability to restart X-Rite Device Services directly from the Colorbration’s application.
  • Note : Added the ability to make version 4 of “ICC Max compatible” profiles.
  • Note : Updated ICC version 4 profiles to the 4.3 specification.
  • Note : For Mac users with v1.2.0 or v1.3.0 Colorbration application, please uninstall previous version and install v1.5.1 to resolve online software update issue
  • Note : Add support for for VP2785-2K.
  • Note : Support macOS Mojave 10.14 (Remark: macOS Catalina 10.15 is not supported currently due to compatibility issue.)
  • Version : v1.7.0
  • Release Date : 04/13/2021
  • Support : VP2468, VP2768, VP2768-4K, VP2771, VP2785-2K, VP2785-4K, VP3268-4K, VP3481, VP3881
  • Operating system :
      ‧ Microsoft Windows : Windows 7 with Service Pack 1, Windows 8.1 / Windows 10.
  • Display calibration sensor : Best with ViewSonic CS-XRi1, compatible with X-Rite i1Display Pro and i1 Pro 2, X-Rite i1Pro 3 and i1Pro 3 PLUS spectrophotometers, X-Rite i1Display Pro PLUS device.
  • Note : Fixed an issue where the application would not install on Windows 10 latest OS versions.
  • Note : Added one “Reset Device” button to provide the ability to restart X-Rite Device Services directly from the Colorbration’s application.
  • Note : Added the ability to make version 4 of “ICC Max compatible” profiles.
  • Note : Updated ICC version 4 profiles to the 4.3 specification.
  • Note : Please set to extend display mode when using laptop for calibration in order to apply calibrated profile properly.

Colorbration+

Windows Support Software Download


ViewSonic’s Colorbration+ offers hardware calibration that aligns communication between the graphics card and the monitor to ensure long-term consistency and accurate colors on ViewSonic ColorPro monitors.

  • Version : v1.0.0.22
  • Release Date : 03/19/2021
  • Support : VP2468, VP2468a, VP2458, VP2768, VP2768a, VP2768-4K, VP2771, VP2785-4K, VP2785-2K, VP3268-4K, VP3481, VP3481a, VP3881
  • Operating system :
      ‧ macOS Mojave (10.14); macOS Catalina (10.15)
      ‧ Display calibration sensor : ‧ ViewSonic Colorbration Kit— CS-XRi1 (sold separately) / X-Rite i1 Display Pro/ X-Rite i1 Pro 2 / X-Rite i1 Studio / Datacolor SpyderX series.

Download Windows Support Software For Mac 10.6.8

Download the windows support software download
  • Version : v1.0.0.31
  • Release Date : 11/25/2020
  • Support : VP2458, VP2468, VP2768, VP2785-2K, VP2768-4K, VP2771, VP2785-4K, VP3268-4K, VP3481, VP3881
  • Operating system :
      ‧ Microsoft Windows : Windows 7 with Service Pack 1, Windows 8.1 / Windows 10.
      ‧ Display calibration sensor : ‧ ViewSonic Colorbration Kit— CS-XRi1 (sold separately) / X-Rite i1 Display Pro / X-Rite i1 Pro 2 / X-Rite i1 Studio / Datacolor Spyder 5, Datacolor SpyderX series.
Comments are closed.