Install Macos On Pc Laptop

2/13/2022by admin

Reinstall macOS. Select Reinstall macOS from the utilities window in macOS Recovery, then click Continue and follow the onscreen instructions. Follow these guidelines during installation: If the installer asks to unlock your disk, enter the password you use to log in to your Mac. If the installer doesn't see your disk, or it says that it can't. Restart PC, Make sure your prepared thumb drive is plugged into your PC.: As shown in the Video: Boot into the Snow Leopard installer, format the hard drive you want to install Snow Leopard to (go to Utilities - Disk Utility, then click on the drive, select 1 Partition, Mac OS X Journaled, give it a name, and make sure GUID Partition Table is. Answer: Yes,you can install MacOS on any laptop and turn it into a Hackintosh but the only good thing you’ll be having after that is-a good looking UI (User interface). First off, I'd like to know if the process involved in installing Mac OS X on a windows based laptop (replacing the windows OS not necessarily dual booting) is an advisable decision. For school next year, I would like to have a laptop with Mac OS so that I can use certain software (mainly Final Cut Pro). Answer (1 of 3): You can use any laptop or Surface to install MacOS. (Hackintosh) What Doesn’t Work? Pretty much everything works as a normal Mac, with the.

I use a Windows PC regularly. Sometimes, I need to run some apps for Mac, so I decide to install macOS on Windows PC with VMware. Most of the guides online are too difficult to follow, so I share mine in this post. You can also watch the step-by-step video guide below.

MacOS virtual machines are also good for those who can afford a Mac like me. In addition, it is good to run some untrusted or unstable apps for testing, because it won’t affect your physical machine.

Tools needed

1. VMware workstation 16/15.

I use VMware Workstation 16 in this guide, but you can use an older version. If you use a too old version like VMware Workstation 12, I suggest you install an older version of macOS.

2. macOS Unlocker V3.0 for VMware Workstation.

VMware Workstation by default does not support macOS installation. You can run this MacOS Unlocker to lift such restrictions. It is a free open-source program. If you run VMware Workstation 15 or previous versions, you can also use this Auto Unlocker, which is easier to unlock macOS restriction.

3. macOS Big Sur ISO file.

Some people manage to install macOS with the original image file, but ISO image file is much easier to install on VMware. You can just click the link to download it on your PC for later use.

Install VMware on Windows PC

When everything is ready, you can follow the steps below to Install VMware workStation Pro. If you already have VMware installed, you can skip to the next section.

Install

1. After downloading the VMware Workstation Pro, right-click and select “Run as administrator” to start the installation.

2. If there is a prompt to restart during the first installation, click “Yes” to continue. According to the prompt, continue to click “Next” to install

3. In the Custom Setup window, it is recommended to change the installation location to another partition instead of C: drive.

4. In the User Experience Settings, you can uncheck the two useless options and click “Next”.

5. In the Shortcuts window, click “Next” and click “Install” in the next window to start installing.

6. When the installation is complete, click “License” and, enter the serial number in the same folder, restart the computer after activation.

After installation, you cannot yet install macOS, so don’t run VMware at the moment.

Unlock VMware for macOS

If you open VMware to create a new virtual machine, you will find that macOS is not one of the available guest operating systems. Don’t worry. You can follow the steps below to unlock this feature with ease. If you have not run VMware after installation, you can jump to step 3.

1. Right-click on the Windows taskbar and select “Task Manager”.

2. In Task Manager, click on the “Services” tab, and stop all the services related to VMware.

3. Locate the Unlocker for MacOS that you downloaded. Unzip the file. Find the file “win-install.cmd” and run as administrator.

4. Waiting for automatic operation, it will automatically shut down.

5. Open the VMware virtual machine and click “Create a new virtual machine”

6. Select “Typical”, then click “Next”

7. Click “Browse” and select the macOS ISO file that you prepared, and click “Open”. You may receive the message that the system cannot be detected by default, just click “Next” to continue.

8. Select “Apple Mac OS X”, select “macOS 11.1” for the version, and click “Next”. You should select the corresponding version based on the ISO you choose.

9. Click “Next”, it is recommended to change the installation location to another partition instead of C: drive. Then you can adjust the disk capacity, the recommended long-term use is greater than 60GB.

10. In the Ready to Create Virtual Machine window, Click “Custom Hardware”, 8G running memory and 4 processors are recommended, which should not beyond your physical hardware.

11. Click “Finish” and you can power on this virtual machine to install macOS.

Open Virtual Machine to Install macOS Big Sur

After the previous configuration, you should be able to install macOS virtual machine like you install macOS on a physical machine. If you haven’t done so before, you can refer to the steps below. I will keep it simple.

1. Open the VMware virtual machine and click “Power on this virtual machine”

2. Wait for the system to load and you will be asked to select a language. Just select one based on your preference and click the Arrow icon to continue.

3. Then it will bring you to the macOS Recovery. From here, select “Disk Utility”.

4. Click the “VMware Virtual SATA Hard Drive.” ​​disk on the left, then click “Edit” and select “Erase” from the drop-down menu. You can give a name to your hard drive and select Mac OS Extended (Journaled) as the format, and click “Erase”.

5. Wait for the erasing progress and click “Finish” and click the “red button” to exit Disk Utility.

6. Now you can select “Install macOS Big Sur” and click “Continue”. Agree to the terms of the software license agreement when asked.

7. Select the hard drive that you just erased and click “Continue” to install macOS on the virtual machine.

8. Wait for the installation of the system and you can now follow the wizard to complete all the setup for your Mac.

Install VMware Tools

If you want to easily transfer any files between a physical machine and virtual machine, you should also install VMware Tools after the installation of macOS. After installation of VMware Tools, you can also use macOS on full screen.

VMware has this feature built-in, so you can just click the “VM” tab and select “Install VMware Tools” to get started.

If that process fails, you can use the ISO file as I did in the video. It is in the macOS ISO folder. Just find the file named “darwin.iso”.

Final summary

Install

With a macOS virtual machine on Windows, you can experience macOS at the lowest cost and the most convenient and simple way. The biggest advantage is security and stability. You can download untrusted programs and files in the virtual machine without worrying about damaging your physical machine.

You can create a few snapshots of your macOS virtual machine, so you can always restore everything back easily in case something bad happens to the virtual machine.

These advanced steps are primarily for system administrators and others who are familiar with the command line. You don't need a bootable installer to upgrade macOS or reinstall macOS, but it can be useful when you want to install on multiple computers without downloading the installer each time.

What you need to create a bootable installer

  • A USB flash drive or other secondary volume formatted as Mac OS Extended, with at least 14GB of available storage
  • A downloaded installer for macOS Big Sur, Catalina, Mojave, High Sierra, or El Capitan

Download macOS

  • Download: macOS Big Sur, macOS Catalina, macOS Mojave, or macOS High Sierra
    These download to your Applications folder as an app named Install macOS [version name]. If the installer opens after downloading, quit it without continuing installation. To get the correct installer, download from a Mac that is using macOS Sierra 10.12.5 or later, or El Capitan 10.11.6. Enterprise administrators, please download from Apple, not a locally hosted software-update server.
  • Download: OS X El Capitan
    This downloads as a disk image named InstallMacOSX.dmg. On a Mac that is compatible with El Capitan, open the disk image and run the installer within, named InstallMacOSX.pkg. It installs an app named Install OS X El Capitan into your Applications folder. You will create the bootable installer from this app, not from the disk image or .pkg installer.

Use the 'createinstallmedia' command in Terminal

  1. Connect the USB flash drive or other volume that you're using for the bootable installer.
  2. Open Terminal, which is in the Utilities folder of your Applications folder.
  3. Type or paste one of the following commands in Terminal. These assume that the installer is in your Applications folder, and MyVolume is the name of the USB flash drive or other volume you're using. If it has a different name, replace MyVolume in these commands with the name of your volume.

Big Sur:*

Catalina:*

Laptop

Mojave:*

Install mac os on pc laptop dual boot

High Sierra:*

El Capitan:

* If your Mac is using macOS Sierra or earlier, include the --applicationpath argument and installer path, similar to the way this is done in the command for El Capitan.


After typing the command:

  1. Press Return to enter the command.
  2. When prompted, type your administrator password and press Return again. Terminal doesn't show any characters as you type your password.
  3. When prompted, type Y to confirm that you want to erase the volume, then press Return. Terminal shows the progress as the volume is erased.
  4. After the volume is erased, you may see an alert that Terminal would like to access files on a removable volume. Click OK to allow the copy to proceed.
  5. When Terminal says that it's done, the volume will have the same name as the installer you downloaded, such as Install macOS Big Sur. You can now quit Terminal and eject the volume.

Use the bootable installer

Determine whether you're using a Mac with Apple silicon, then follow the appropriate steps:

Apple silicon

  1. Plug the bootable installer into a Mac that is connected to the internet and compatible with the version of macOS you're installing.
  2. Turn on your Mac and continue to hold the power button until you see the startup options window, which shows your bootable volumes.
  3. Select the volume containing the bootable installer, then click Continue.
  4. When the macOS installer opens, follow the onscreen instructions.

Install Mac Os On Pc Laptop Dual Boot

Intel processor

  1. Plug the bootable installer into a Mac that is connected to the internet and compatible with the version of macOS you're installing.
  2. Press and hold the Option (Alt) ⌥ key immediately after turning on or restarting your Mac.
  3. Release the Option key when you see a dark screen showing your bootable volumes.
  4. Select the volume containing the bootable installer. Then click the up arrow or press Return.
    If you can't start up from the bootable installer, make sure that the External Boot setting in Startup Security Utility is set to allow booting from external media.
  5. Choose your language, if prompted.
  6. Select Install macOS (or Install OS X) from the Utilities window, then click Continue and follow the onscreen instructions.

Learn more

Install Mac Os On Pc Laptop

A bootable installer doesn't download macOS from the internet, but it does require an internet connection to get firmware and other information specific to the Mac model.

How To Install Macos Sierra On Pc/laptop

For information about the createinstallmedia command and the arguments you can use with it, make sure that the macOS installer is in your Applications folder, then enter the appropriate path in Terminal:

Comments are closed.