Os X Mavericks Installer

2/13/2022by admin

So, you’ve decided to download an older version of Mac OS X. There are many reasons that could point you to this radical decision. To begin with, some of your apps may not be working properly (or simply crash) on newer operating systems. Also, you may have noticed your Mac’s performance went down right after the last update. Finally, if you want to run a parallel copy of Mac OS X on a virtual machine, you too will need a working installation file of an older Mac OS X. Further down we’ll explain where to get one and what problems you may face down the road.

To download the Mac OS Mavericks installer, go to macos.apple.com and click on the Download now button. Downloads and installation instructions: The installation instructions will show up on the Downloads tab, and when you click on it, you’ll see the download link. If you want to install Mac OS Mountain Lion or Yosemite on your computer. Dec 28, 2016 Set the Format type to Mac OS Extended (Journaled.) Click on the Partition button and wait for the process to finish. Quit Disk Utility and return to the Utility Menu. Select Reinstall OS X from the Utility Menu and click on the Install button. If you can successfully download the Mavericks installer, quit it. Then you have to use the command 'chmod -R +x Install OS X Mavericks.app' inside the extracted ZIP. OP can fix this by putting the installer into a ZIP file and uploading that, it seems that when zipping, it messes something up and then you cannot launch the installer. After fixing the issue, it seems to install fine.

The Finder window will display the contents of the Install OS X Mavericks file. Open the Contents folder. Open the SharedSupport folder. Right-click or control-click the InstallESD.dmg file, and then select Copy 'InstallESD.dmg' from the pop-up menu. Close the Finder window, and return to your Mac's Desktop. If you're interested in running Mac OS X, but you don't want to pay ridiculous prices for a normal Mac, then a Hackintosh just might be f.

A list of all Mac OS X versions

We’ll be repeatedly referring to these Apple OS versions below, so it’s good to know the basic macOS timeline.

Cheetah 10.0Puma 10.1Jaguar 10.2
Panther 10.3Tiger 10.4Leopard 10.5
Snow Leopard 10.6Lion 10.7Mountain Lion 10.8
Mavericks 10.9Yosemite 10.10El Capitan 10.11
Sierra 10.12High Sierra 10.13Mojave 10.14
Catalina 10.15

STEP 1. Prepare your Mac for installation

Given your Mac isn’t new and is filled with data, you will probably need enough free space on your Mac. This includes not just space for the OS itself but also space for other applications and your user data. One more argument is that the free space on your disk translates into virtual memory so your apps have “fuel” to operate on. The chart below tells you how much free space is needed.

Note, that it is recommended that you install OS on a clean drive. Next, you will need enough disk space available, for example, to create Recovery Partition. Here are some ideas to free up space on your drive:

  • Uninstall large unused apps
  • Empty Trash Bin and Downloads
  • Locate the biggest files on your computer:

Go to Finder > All My Files > Arrange by size
Then you can move your space hoggers onto an external drive or a cloud storage.
If you aren’t comfortable with cleaning the Mac manually, there are some nice automatic “room cleaners”. Our favorite is CleanMyMac as it’s most simple to use of all. It deletes system junk, old broken apps, and the rest of hidden junk on your drive.

Download CleanMyMac for OS 10.4 - 10.8 (free version)

Download CleanMyMac for OS 10.9 (free version)

Download CleanMyMac for OS 10.10 - 10.14 (free version)

STEP 2. Get a copy of Mac OS X download

Normally, it is assumed that updating OS is a one-way road. That’s why going back to a past Apple OS version is problematic. The main challenge is to download the OS installation file itself, because your Mac may already be running a newer version. If you succeed in downloading the OS installation, your next step is to create a bootable USB or DVD and then reinstall the OS on your computer.

How to download older Mac OS X versions via the App Store


If you once had purchased an old version of Mac OS X from the App Store, open it and go to the Purchased tab. There you’ll find all the installers you can download. However, it doesn’t always work that way. The purchased section lists only those operating systems that you had downloaded in the past. But here is the path to check it:

  1. Click the App Store icon.
  2. Click Purchases in the top menu.
  3. Scroll down to find the preferred OS X version.
  4. Click Download.

This method allows you to download Mavericks and Yosemite by logging with your Apple ID — only if you previously downloaded them from the Mac App Store.

Without App Store: Download Mac OS version as Apple Developer

If you are signed with an Apple Developer account, you can get access to products that are no longer listed on the App Store. If you desperately need a lower OS X version build, consider creating a new Developer account among other options. The membership cost is $99/year and provides a bunch of perks unavailable to ordinary users.

Nevertheless, keep in mind that if you visit developer.apple.com/downloads, you can only find 10.3-10.6 OS X operating systems there. Newer versions are not available because starting Mac OS X Snow Leopard 10.7, the App Store has become the only source of updating Apple OS versions.

Purchase an older version of Mac operating system

You can purchase a boxed or email version of past Mac OS X directly from Apple. Both will cost you around $20. For the reason of being rather antiquated, Snow Leopard and earlier Apple versions can only be installed from DVD.

Buy a boxed edition of Snow Leopard 10.6
Get an email copy of Lion 10.7
Get an email copy of Mountain Lion 10.8

The email edition comes with a special download code you can use for the Mac App Store. Note, that to install the Lion or Mountain Lion, your Mac needs to be running Snow Leopard so you can install the newer OS on top of it.

How to get macOS El Capitan download

If you are wondering if you can run El Capitan on an older Mac, rejoice as it’s possible too. But before your Mac can run El Capitan it has to be updated to OS X 10.6.8. So, here are main steps you should take:

1. Install Snow Leopard from install DVD.
2. Update to 10.6.8 using Software Update.
3. Download El Capitan here.

“I can’t download an old version of Mac OS X”

If you have a newer Mac, there is no physical option to install Mac OS versions older than your current Mac model. For instance, if your MacBook was released in 2014, don’t expect it to run any OS released prior of that time, because older Apple OS versions simply do not include hardware drivers for your Mac.

But as it often happens, workarounds are possible. There is still a chance to download the installation file if you have an access to a Mac (or virtual machine) running that operating system. For example, to get an installer for Lion, you may ask a friend who has Lion-operated Mac or, once again, set up a virtual machine running Lion. Then you will need to prepare an external drive to download the installation file using OS X Utilities.

After you’ve completed the download, the installer should launch automatically, but you can click Cancel and copy the file you need. Below is the detailed instruction how to do it.

STEP 3. Install older OS X onto an external drive

The following method allows you to download Mac OS X Lion, Mountain Lion, and Mavericks.

  1. Start your Mac holding down Command + R.
  2. Prepare a clean external drive (at least 10 GB of storage).
  3. Within OS X Utilities, choose Reinstall OS X.
  4. Select external drive as a source.
  5. Enter your Apple ID.

Now the OS should start downloading automatically onto the external drive. After the download is complete, your Mac will prompt you to do a restart, but at this point, you should completely shut it down. Now that the installation file is “captured” onto your external drive, you can reinstall the OS, this time running the file on your Mac.

  1. Boot your Mac from your standard drive.
  2. Connect the external drive.
  3. Go to external drive > OS X Install Data.

Locate InstallESD.dmg disk image file — this is the file you need to reinstall Lion OS X. The same steps are valid for Mountain Lion and Mavericks.

How to downgrade a Mac running later macOS versions

If your Mac runs macOS Sierra 10.12 or macOS High Sierra 10.13, it is possible to revert it to the previous system if you are not satisfied with the experience. You can do it either with Time Machine or by creating a bootable USB or external drive.
Instruction to downgrade from macOS Sierra

Instruction to downgrade from macOS High Sierra

Instruction to downgrade from macOS Mojave

Instruction to downgrade from macOS Catalina

Before you do it, the best advice is to back your Mac up so your most important files stay intact. In addition to that, it makes sense to clean up your Mac from old system junk files and application leftovers. The easiest way to do it is to run CleanMyMac X on your machine (download it for free here).

Visit your local Apple Store to download older OS X version

If none of the options to get older OS X worked, pay a visit to nearest local Apple Store. They should have image installations going back to OS Leopard and earlier. You can also ask their assistance to create a bootable USB drive with the installation file. So here you are. We hope this article has helped you to download an old version of Mac OS X. Below are a few more links you may find interesting.

  • Mac OS X Mavericks Free Download DMG 10.9 Bootable Installer Version. It is complete bootable Mavericks 10.9 DMG Disk Image for Clean OS Install. OS X Mavericks (version 10.9) is the tenth major release of OS X, Apple Inc.' S desktop and server operating system for Macintosh computers.
  • I have an iMac 7,1. I am erasing the HDD so I can set up the machine for donation. I cannot find an appropriate version of OS X to download and install. As I understand it, the computer can handle up to El Capitan. I have searched everywhere for Mavericks and others to no avail.

Mac OS X Mavericks 10.9.3 (Build: 13D65) Final is officially available at Mac App Store for Free via iTunes, and also the Official Direct Download Links of OS X Mavericks 10.9.3 Final Standalone Setup Installer.DMG File and OS X Mavericks 10.9.3 Final Update.DMG File for manual installation on multiple computers/laptops is also available below. Compatible devices for Mac OS X Mavericks download. IMac ( After 2006 iMac versions), Mac Book and Mac Book Black/White (the year 2008 and 2009 upwards), All Mac Book Retina Models, Mac Book Pro 15 inch, Mac Book Pro 17 inch, Mac Mini (2007 or later), Mac Book Air 2008 or later, Mac Pro (2008 or later), Mac Book Pro 13 inch (2009 or later), Xserve (2009).

Quickstart

  1. Install Xcode and the Xcode Command Line Tools
  2. Agree to Xcode license in Terminal: sudo xcodebuild -license
  3. Install MacPorts for your version of the Mac operating system:

Installing MacPorts

MacPorts version 2.6.3 is available in various formats for download and installation (note, if you are upgrading to a new major release of macOS, see the migration info page):

  • “pkg” installers for Catalina, Mojave, High Sierra and Sierra, for use with the macOS Installer. This is the simplest installation procedure that most users should follow after meeting the requirements listed below. Installers for legacy platforms El Capitan, Yosemite, Mavericks, Mountain Lion, Lion, Snow Leopard, Leopard and Tiger are also available.
  • In source form as either a tar.bz2 package or a tar.gz one for manual compilation, if you intend to customize your installation in any way.
  • Git clone of the unpackaged sources, if you wish to follow MacPorts development.
  • The selfupdate target of the port(1) command, for users who already have MacPorts installed and wish to upgrade to a newer release.

Checksums for our packaged downloads are contained in the corresponding checksums file.

The public key to verify the detached GPG signatures can be found under the attachments section on jmr's wiki page. (Direct Link).

Please note that in order to install and run MacPorts on macOS, your system must have installations of the following components:

  1. Apple's Xcode Developer Tools (version 11.0 or later for Catalina, 10.0 or later for Mojave, 9.0 or later for High Sierra, 8.0 or later for Sierra, 7.0 or later for El Capitan, 6.1 or later for Yosemite, 5.0.1 or later for Mavericks, 4.4 or later for Mountain Lion, 4.1 or later for Lion, 3.2 or later for Snow Leopard, or 3.1 or later for Leopard), found at the Apple Developer site, on your Mac operating system installation CDs/DVD, or in the Mac App Store. Using the latest available version that will run on your OS is highly recommended, except for Snow Leopard where the last free version, 3.2.6, is recommended.
  2. Apple's Command Line Developer Tools can be installed on recent OS versions by running this command in the Terminal:

    Older versions are found at the Apple Developer site, or they can be installed from within Xcode back to version 4. Users of Xcode 3 or earlier can install them by ensuring that the appropriate option(s) are selected at the time of Xcode's install ('UNIX Development', 'System Tools', 'Command Line Tools', or 'Command Line Support').

  3. Xcode 4 and later users need to first accept the Xcode EULA by either launching Xcode or running:
  4. (Optional) The X11 windowing environment for ports that depend on the functionality it provides to run. You have multiple choices for an X11 server:
    • Install the xorg-server port from MacPorts (recommended).
    • The XQuartz Project provides a complete X11 release for macOS including server and client libraries and applications. It has however not been updated since 2016.
    • Apple's X11.app is provided by the “X11 User” package on older OS versions. It is always installed on Lion, and is an optional installation on your system CDs/DVD with previous OS versions.

macOS Package (.pkg) Installer

The easiest way to install MacPorts on a Mac is by downloading the pkg or dmg for Catalina, Mojave, High Sierra, Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion, Lion, Snow Leopard, Leopard or Tiger and running the system's Installer by double-clicking on the pkg contained therein, following the on-screen instructions until completion.

This procedure will place a fully-functional and default MacPorts installation on your host system, ready for usage. If needed your shell configuration files will be adapted by the installer to include the necessary settings to run MacPorts and the programs it installs, but you may need to open a new shell for these changes to take effect.

The MacPorts “selfupdate” command will also be run for you by the installer to ensure you have our latest available release and the latest revisions to the “Portfiles” that contain the instructions employed in the building and installation of ports. After installation is done, it is recommended that you run this step manually on a regular basis to to keep your MacPorts system always current:

At this point you should be ready to enjoy MacPorts!

Type “man port” at the command line prompt and/or browse over to our Guide to find out more information about using MacPorts. Help is also available.

Source Installation

If on the other hand you decide to install MacPorts from source, there are still a couple of things you will need to do after downloading the tarball before you can start installing ports, namely compiling and installing MacPorts itself:

  1. cd” into the directory where you downloaded the package and run “tar xjvf MacPorts-2.6.3.tar.bz2” or “tar xzvf MacPorts-2.6.3.tar.gz”, depending on whether you downloaded the bz2 tarball or the gz one, respectively.
  2. Build and install the recently unpacked sources:
    • cd MacPorts-2.6.3
    • ./configure && make && sudo make install
    Optionally:
    • cd ./
    • rm -rf MacPorts-2.6.3*

These steps need to be perfomed from an administrator account, for which “sudo” will ask the password upon installation. This procedure will install a pristine MacPorts system and, if the optional steps are taken, remove the as of now unnecessary MacPorts-2.6.3 source directory and corresponding tarball.

To customize your installation you should read the output of “./configure --help more” and pass the appropriate options for the settings you wish to tweak to the configuration script in the steps detailed above.

You will need to manually adapt your shell's environment to work with MacPorts and your chosen installation prefix (the value passed to configure's --prefix flag, defaulting to /opt/local):

  • Add ${prefix}/bin and ${prefix}/sbin to the start of your PATH environment variable so that MacPorts-installed programs take precedence over system-provided programs of the same name.
  • If a standard MANPATH environment variable already exists (that is, one that doesn't contain any empty components), add the ${prefix}/share/man path to it so that MacPorts-installed man pages are found by your shell.
  • For Tiger and earlier only, add an appropriate X11 DISPLAY environment variable to run X11-dependent programs, as Leopard takes care of this requirement on its own.

Lastly, you need to synchronize your installation with the MacPorts rsync server:

Upon completion MacPorts will be ready to install ports!

It is recommended to run the above command on a regular basis to keep your installation current. Type “man port” at the command line prompt and/or browse over to our Guide to find out more information about using MacPorts. Help is also available.

Git Sources

If you are developer or a user with a taste for the bleeding edge and wish for the latest changes and feature additions, you may acquire the MacPorts sources through git. See the Guide section on installing from git.

Purpose-specific branches are also available at the https://github.com/macports/macports-base/branches url.

Alternatively, if you'd simply like to view the git repository without checking it out, you can do so via the GitHub web interface.

Selfupdate

If you already have MacPorts installed and have no restrictions to use the rsync networking protocol (tcp port 873 by default), the easiest way to upgrade to our latest available release, 2.6.3, is by using the selfupdate target of the port(1) command. This will both update your ports tree (by performing a sync operation) and rebuild your current installation if it's outdated, preserving your customizations, if any.

Other Platforms

Running on platforms other than macOS is not the main focus of The MacPorts Project, so remaining cross-platform is not an actively-pursued development goal. Nevertheless, it is not an actively-discouraged goal either and as a result some experimental support does exist for other POSIX-compliant platforms such as *BSD and GNU/Linux.

The full list of requirements to run MacPorts on these other platforms is as follows (we assume you have the basics such as GCC and X11):

  • Tcl (8.4 or 8.5), with threads.
  • mtree for directory hierarchy.
  • rsync for syncing the ports.
  • cURL for downloading distfiles.
  • SQLite for the port registry.
  • GNUstep (Base), for Foundation (optional, can be disabled via configure args).
  • OpenSSL for signature verification, and optionally for checksums. libmd may be used instead for checksums.

Normally you must install from source or from an git checkout to run MacPorts on any of these platforms.

Help

Help on a wide variety of topics is also available in the project Guide and through our Trac portal should you run into any problems installing and/or using MacPorts. Of particular relevance are the installation & usage sections of the former and the FAQ section of the Wiki, where we keep track of questions frequently fielded on our mailing lists.

Os X Mavericks Installer

If any of these resources do not answer your questions or if you need any kind of extended support, there are many ways to contact us!

Check compatibility

You can upgrade to OS Yosemite on any of the following Mac models. Your Mac also needs at least 2GB of memory and 8GB of available storage space.

MacBook introduced in 2009 or later, plus MacBook (13-inch, Aluminum, Late 2008)
MacBook Air introduced in late 2008 or later
MacBook Pro introduced in mid 2007 or later
Mac mini introduced in early 2009 or later
iMac introduced in mid 2007 or later
Mac Pro introduced in early 2008 or later
Xserve models introduced in early 2009

To find your Mac model, memory, storage space, and macOS version, choose About This Mac from the Apple menu . If your Mac isn't compatible with OS X Yosemite, the installer will let you know.Myriad pro font download mac mojave.

Make a backup

Before installing any upgrade, it’s a good idea to back up your Mac. Time Machine makes it simple, and other backup methods are also available. Learn how to back up your Mac.

Get connected

It takes time to download and install OS X, so make sure that you have a reliable Internet connection. Microsoft teams download mac app. If you're using a Mac notebook computer, plug it into AC power.

Download OS X Yosemite

For the strongest security and latest features, find out whether you can upgrade to macOS Catalina, the latest version of macOS.

If you still need OS X Yosemite, use this link: Download OS X Yosemite. A file named InstallMacOSX.dmg will download to your Mac.

Install the macOS installer

Double-click the downloaded file to open a window showing its contents. Then double-click the file within, named InstallMacOSX.pkg.

Follow the onscreen instructions, which will guide you through the steps necessary to install.

Download Os X Dmg Macdrug

Installer

Begin installation

After installation of the installer is complete, open the Applications folder on your Mac, then double-click the file named Install OS X Yosemite.

Click Continue and follow the onscreen instructions. You might find it easiest to begin installation in the evening so that it can complete overnight, if needed.

Allow installation to complete

Please allow installation to complete without putting your Mac to sleep or closing its lid. Your Mac might restart, show a progress bar, or show a blank screen several times as it installs both OS X and related updates to your Mac firmware.

Mac Os X Mavericks Install Dmg Download Torrent

Download Os X Mavericks Installer

Learn more

Os X Mavericks Installer Download Link

Mac Os X Mavericks Installer Dmg Download

  • OS X Yosemite won't install on top of a later version of macOS, but you can erase your disk first or install on another disk.
  • You can use macOS Recovery to reinstall macOS.
Comments are closed.